menu Menu

Beam Bending

In 1992 we began operating what was then the largest structural steel beam bending roll in the Western Hemisphere. In 1999 we began operating the world’s largest beam bending machine. The combination of the greatest capacity with the most experience makes us your best choice for any project requiring bending of beams. With 30 specialized machines capable of beam bending, we can match the machine and the method to your specific requirements. For example, we can minimize trim and obtain a greater yield from the raw steel material because we have more sizes of machines to choose from than any other company. (Trim or waste or cut-off is the material required at the beginning and ending of steel curved sections: its length is determined by the distance between the rolls on the machine.) We have over 130,000 square feet of plant with the capacity to lift more than 40 tons of steel and ship steel sections 105 ft. long. We have close relationships with specialized freight carriers who have the equipment—“low boys,” stretch trailers, etc—to economically and safely ship oversize loads anywhere on the continent. All steel beam material is stored inside a climate controlled, state-of-the-art plant. With our extensive records, we can advise you regarding what steel beam bending can be done, what if any shrinkage or deformation might occur, and offer cost- and time-saving suggestions. Call us for a quick, competent and consistent consultation or quotation. We are bending the largest beams in both Chicago, IL, and Kansas City, MO.

Beam Bending Images

Beam Bending Value-Added Services

In addition to beam bending, we also rough, torch cut; plasma cut; and saw cut these sections. We can punch or drill holes in the web or flanges. We can also weld on end plates as we do on tunnel supports.

Beam Bending Applications

Equipment manufacturers use us for bending of beams for heavy equipment, truck frames, tank stiffeners, and monorails. Structural steel fabricators use us for steel beam bending for building frames, for roof supports, for canopies, for trellises, and for arches. These elements are found in stadiums, airports, rail stations, bus shelters, commercial buildings, auditoriums, gymnasiums, and many other structures.

How to order the bending of steel beam sections found here.

Contact us for more information on steel beam bending and other metal bending services we provide.

Click here to view more of our beam bending images.


  • "The quality and accuracy of CMRP's Work is outstanding."
    Eric T., Illinois
  • "Please pass on a big thank you to your team. All of the folks here that have seen the parts have provided me with the most positive feedback possible. Your company has new fans here."
    Bruce E., Kansas
  • "Without CMRP able to roll these channels to my specifications, there was no way this beautiful round antenna would have ever worked. This is the first round weather radar antenna of its kind in the world and the fabrication recipe (starting with your rings) that produced the antenna actually went together without issue and seems to be very repeatable."
    Damon S., Wisconsin
  • "My customer has installed several truck loads worth of 36" x 160# WF beams you rolled and cambered for us. He was very pleased with the quality of your work. Thank you for your attention to detail and the quality of work you produce."
    Justin J., Alabama
  • "The rolled stringers were right on the button as far as pitch and radius."
    Bob O., Illinois
  • "I really appreciate your company coming through on this order and expediting the material when you said you would. It is nice to know when someone gives you a date they follow through with it and stick by their word. Thanks again!"
    Jason R., Missouri
  • "The last order of rings were the best that we have received from you. The flanges were all flat. Keep them coming like that."
    Lenny P., Ohio
    Peggy, Texas
  • "The ring looks good! The OD is dead on. Thank you for your concerns regarding our questions and responding so quickly. I was impressed! It is quite apparent that Chicago Metal is customer-service oriented."
    Fran Z., Pennsylvania
  • "Please pass on to the workers, . . . (your) rings . . . were some of the best our fitter has seen."
    Jeff K., Illinois
  • "I want to thank CMRP for performing as you promised. You are ahead of schedule and the strakes are fitting great. In addition, thank you for actually exceeding what you promised."
    Jim A., New York
  • "Your advice was a significant contribution to the project."
    John Z., Illinois
  • "These pipes were rolled DEAD ON. The guys in the shop said they had never seen a pipe come in and hit every point like that in a long long time."
    Joe C., Missouri
  • "The rolling on these rectangular tubes was absolutely perfect! Barely any adjustment needed to be made."
    Tom G., Massachusetts
  • “We just placed an order for a few Rolled Angle Rings (for a Rush project), and Chicago Metal rolled the angles (and had them delivered) to us within 2-1/2 days ..(For the record, we are three states away from them).”
    Jim S., Pennsylvania
  • “I would like a quote on a spiral project. I have heard many good things about your quality and timeliness from other fabricators.”
    Ryan L., Utah
  • “The rolled beams were delivered yesterday and look very good. Thank you for great service!”
    Thomas S., Maine
  • “I’ve worked with CMRP for over 16 years and can rely on them for any size job and in any time frame. There is an ease of doing business with CMRP. They have great people working for them on all levels which makes it enjoyable to do business with their company. Good service matters a lot in this industry and CMRP delivers every time.”
    Mindy, H., Indiana
  • “It is unbelievable how good a job you guys did rolling these beams.”
    Richard G., Canada
  • “You all helped us out greatly when no one else seemed they could. Everything worked out wonderfully!”
    Cliff P., Florida
  • “The parts are very impressive and the service was stellar. I will certainly be using your company in the future for any similar work as well as recommending you to anyone needing such services.”
    Randy W., Georgia
  • “We got everything we needed in a very short turnaround, I appreciate it – so much in fact I have been talking up CMRP to the other theatres in town on our forum group. We are happy to have a reliable source to turn to.”
    Russell P., Illinois
  • “Quote was great! Timely, appropriate, and frankly less money than we expected.”
    James L., New York
  • “Our customer did not respond until mid afternoon, 2 days before they needed the job installed, with the parts they needed. I contacted CMRP, who immediately took action and shipped out my order the same day! This all happened like clockwork, allowing us to meet the deadline.”
    Margo R., Ohio
  • “Material on time and right on spec.”
    Dave F., Pennsylvania
  • “We only use CMRP for our rolling needs. We can always depend on getting a finished product that is to our expectations or better no matter the quantity.”
    David P., New York
  • “You are on top of it this morning!! I wish everyone could get quotes back that fast! That is why we use you, fast response to quotes and questions and great quality!”
    Will F., Indiana
  • “Great Pricing. Thank you!”
    Gabe H., Indiana
  • “Your quotes are always so well organized and thorough, I trust your work.”
    Jessica, South Carolina
  • “On larger more complex rolling items, I typically only go to Chicago Metal Rolled Products for pricing due to quality.”
    Kevin H., Pennsylvania

Request A Custom Quote

Upload File (5MB):