Ordering Steel Channel Sections

Channel Flanges In We bend all sizes up to: Any Size
Channel Flanges Out We bend all sizes up to: Any Size
Channel The Hard Way (X-X Axis) We bend all sizes up to: Any Size

When bending channels flanges in, the radius or diameter is usually specified as measured from outside. (Please see image.)
When bending channels flanges out, the radius or diameter is usually specified as measured from the inside. (Please see image.)
When bending channels the hard way, the radius or diameter is usually specified as measured from the inside. (Please see image.)

We can bend channels from the smallest sizes—as small as 1 inch in depth with 3/8 wide flanges and a 1/8 thick web—to the largest, MC 18 x 58#--actually to any size channel that is made.
We can easily bend channels flanges in and flanges out into rings or ring segments.
We can bend a C9 x 20# channel the hard way to a 4 ft. inside radius, or an MC12 x 10.6 the hard way to a 13 ft. inside radius--all with no distortion: a difficult task.