|Beam The Easy Way (Y-Y Axis)
We bend all sizes up to: 44” x 290#; 36” x 848#
|Beam The Hard Way (X-X Axis)
We bend all sizes up to: 44” x 290#
Beam bending to extraordinarily tight radii is one of our specialties: a W6 x 12 beam bent the hard way to a 14 inch inside radius with no distortion; a W16 x 57 beam bent the hard way to an 8 ft. 6in. inside radius; a W24 x 104 beam bent the hard way to a 44 ft. inside radius; and a W30 x 124 bent the hard way to a 56 ft. 9 in. inside radius. Only a few companies in the world can do steel beam bending of these sections this tight. And this bending is done cold, not with the heat induction method which is typically more expensive and slower.
Because we have a wide variety of beam bending machines, we can minimize trim (the straight sections on the end of curved sections) thereby saving money in material, rolling cost, and shipping costs. Please consult with our project managers on the most economical methods for your steel beam bending.
Contact us for more information on steel beam bending and for help in ordering steel beam sections.